Product Standards

Domus Design Group product is built to meet the highest quality and environmental criteria that make the product truly unique to meet the top client expectations.

• Highest classification for minimum formaldehyde emission E1 with a defined limit value of maximum 0.1 ppm emission of formaldehyde to the ambient air.
• We use only high quality woods and veneers. The minimum thickness is always 19 mm (3/4") and depends on the required finish. All fronts are protected by DD lacquer.
• All visible sides of our cabinets have the same finish, including the bottom of our wall cabinets.
• The cabinet base material are made of high-quality and high-density, three-layer fiber boards that are melamine-resin coated on both sides to protect against moisture and normal household wear.
• The cabinet sides and adjustable shelves are finished on all edges with edging strip offering protection against moisture intake and swelling. Front edges reinforced with an impact-resistant thick edge.
• Interior shelves are height adjustable and held securely in place using special anti-slip shelf supports.
• The fiber boards are manufactured in accordance with DIN 68 765 of the emission E1 and fulfill the requirements of the blue angel, according to RAL-ZU-38.
• All product parts are 100% recyclable.
• The plastic toe-kick feet are adjusted individually to compensate for unevenness of the floor. They protect the cabinets from water damage and allow the fitting of installations or cleaning under the cabinets even after the kitchen has been assembled. The toe-kick panel are held in place with clips and can be removed easily.
• Each sink cabinet is equipped with a protective metal panel.
• Drawers and pull-outs are full extension with a standard integrated automatic closing mechanism and pull-out safety stop. This ensures that the drawers can be utilized 100% with optimal visual and physical access. Load capacity 30-50 kg (66-110 lb). A load reserve of more than 25% is considered for the above mentioned loads.
• Profile soft-formed double-walled steel side frame of the drawers and pull-outs enables them to be cleaned easily. High-quality low-noise runner and guide systems are completely concealed and allow drawers to glide into position smoothly and silently on technically high developed plastic rollers.
• The wall cabinet suspension is designed to withstand a load capacity of up to 100 kg (220 lb). Wall fixtures are all metal and invisible, causing no unwanted obstruction within the unit after installation. They are three-dimension adjustable and can be readjusted even after many years of use.
• The clip hinges are all metal and designed to withstand the toughest wear and tear. They are three-dimension adjustable and have proved their durability and strength throughout the years. The door closing mechanism and inset stop buffers guarantee reliable and gentle door closing. Automatic hinges close the door automatically and are used for all 107 degree openings.